Custom Made PLates

Because each coach has different slide configurations it is nearly impossible to offer a click and buy solution to our customers. In fact most of our plates are custom made specifically for your coach. When you are ready to order we ask that you contact our Technical  Director to learn how to measure. Once measurements are taken a price can be provided and your order placed at that time. 

 

* Notice *

In the last few months, we have been hit with several price increases in our raw stainless supplies.  Up until now we have absorbed these rising costs during this time and held our prices steady for our customers.   Unfortunately the increases have reached the level to where we can no longer continue to absorb  the losses.  Therefore, effective July 1st we have adjusted our prices as reflected below in the Guardian Plates price listing.  It is with hope that our customers understand the situation that many small manufacturing companies who utilize steel and aluminum in their products are being faced with. 
Thank you for your understanding. 


Guardian Plate Sets

 

Model 300 RF

The series 300 plate is the same as the 600 RF  with the exception of the bottom of the plate which extends 3 inches under the slide floor. This plate is designed for those customers who have early slide floor separation as well as minimal slide floor rot on rear slides. The series 300 plate measures 1.5 inches on the sidewall surface and extends 3 inches under the slide floor so as not to interfere with roller assemblies. This plate is sometimes used in conjunction with a 1200 series CRP ( custom roller plate ) plate, depending on slide roller assembly locations.  All plates are custom cut to the customer’s individual slide depth. This plate is designed for raised floor slides only.

 

18 ” – $ 172         24” – $ 183        32” – $ 198

 

Model 600 RF

The series 600 plate is the same as the 300 RF  with the exception of the bottom of the plate which extends 6 inches under the slide floor. This plate is designed for those customers who have slide floor separation and rot as well as roller assembly damage on galley and rear slides. The series 600 plate measures 1.5 inches on the side surface and extends 5 inches under the slide floor. This plate is sometimes used in conjunction with a 1200 series CRP plate, depending on slide roller assembly location.  All plates are custom cut to the customer’s individual slide depth. This plate is designed for raised floor slides only.

 

18 ” – $ 232         24” – $ 249      32” – $ 295

 

Model 1200 RF

The 1200 series RF are specialized plates made for raised floor slides. These plates measure 1.5 inches on the side and extend 12 inches under the slide floor. The 1200 series RF plates have  custom relief cuts so as to extend the bottom plate past the rain gutter found behind the wiper seals. This plate is used when roller assemblies are placed near the edge or within 6 inches of the slide sidewall. Once installed the rollers will ride on this plate and in addition seal off the corners from water intrusion preventing slide floor rot.

18 ” – $ 259              24 ” – $ 294           32 ”  =  $ 326

 

Model 1200 FF

The 1200 series FF are specialized plates made specifically for flush floor slides. These plates measure 1.5 inches on the side and extend 12 inches under the slide floor. The 1200 series FF plates are CNC machined and have custom relief cut outs so as to extend the bottom plate past the rain gutters hidden behind the wiper seal. They also incorporate a relief cut to fit around the steel brace found on the bottom of the slide floor. This plate also has a precise 25 degree bend at the exact spot needed to work in conjunction with the flush floor slide preventing excessive glide bar wear. 

STD – $ 359        X L – $ 370          Full Wall – $ 370

Please note: The 1200 series Guardian plate designed for flush floor slides require a different installation method.  A how to video is located on our educational page. If you should have questions please feel free to contact us. We will gladly talk you through the installation process

( All Guardian plates come pre drilled to line up with inner wall braces. When you order plates they will always come in kit form. This Kit includes stainless steel 304 aircraft quality rivets, cobalt drill bit, specialized caulking, adhesives and sealants. Each kit contains two plates for each slide corner. )


 

CRP ‘s ( Custom Roller Plates ) 

 

                   Talin also makes specialized stainless steel plates called Custom Roller Plates. These plates are made to repair damaged laminate created by the rollers on the underside of the slide.  If you have excessive wear or damage to a slide floor from broken slide rollers or a deterioration of the slide floor bottom laminate then we can custom make stainless plates that are pre-drilled for you and ready to install. These plates come in kit form and are made of 18 ga 304 stainless creating strength and support for your slide bottom. Bare plates come in 12 inch widths which disperses weight and forces across a larger surface area. Because the plywood used on the underside of slide floors is typically only 3/8th’s thick, you need the extra wide 12 inch plates for weight disbursement and support. Please contact us with any questions or needs you may have. 

 


Tools For Intallation


 

HEAVY DUTY CUT-OFF SAW IS USED TO REMOVE TRIM PIECES LOCATED ON THE BOTTOM EDGE TRIM PIECES. THEY CAN ALSO BE USED TO MODIFY ANY OF OUR GUARDIAN PLATES IF THE NEED ARISES. THIS SAW ALSO COMES WITH 2 REPLACEMENT DISCS. 

$ 28 . 00
 

 

 
 
Heavy Duty riveter designed to set stainless steel aircraft rivets with less effort. Comes with 5 different sized nose pieces, collection bottle and wrench. This is our preferred rivet tool when installing our Guardian Plates. You will need either a pneumatic or long handled rivet tool in order to set our aircraft grade rivets. Your hand rivet tool will not apply enough force to set our rivets. We strongly urge you to consider having these shipped with your Guardian Plate order.
 $ 25 . 00

 

 

The perfect sealant and adhesive used by the marine industry. Adapted to the RV industry 3-M 5200 provides the RV’er solutions to many sealant and adhesive problems. If you need a spare tube for other projects, let us know and we will include them with your order. 
$ 21 . 00 p/tube  

 

Talin will be glad to provide you with spare rivets for other projects you may have. Made of American made 304 stainless these 3/16 ” x 1/2 ” rivets are aviation grade. Used for purposes that require a positive set. Eliminates stretching on joints under force. Please indicate if you would like large or small flange ( dome ) rivets.

 

$ 5 . 00  p/dozen